Vitamix 750 Serie Manual Del Usuario página 40

8. If the mixture stops circulating, you may have trapped an air bubble. To resolve,
insert the tamper through the lid plug and stir until it "burps." If this does not
work, press the On / Off switch to stop the motor. Remove the container from the
motor base, and use a rubber spatula to press the air bubble away from the blades.
Return the container to the motor base, replace the lid, and continue blending.
9. Take proper care when handling and processing hot ingredients and making
hot soups and sauces.
10. Due to the blender's speed, processing times are much quicker than standard
appliances. Until you are accustomed to the blender, count your time carefully to
avoid over-processing.
11. After pressing the Start / Stop switch to stop the cycle, wait until the blades stop
completely before removing the lid or container from the motor base.
Dry Blade Container
Before using this container for programs or the Variable Speed option, always begin
with the Variable Speed Dial pointed at the Stop Symbol ( ) at the top of the dial.
1. Load the container before placing it on the motor base.
2. Securely fasten the 2-part lid. Always use the complete 2-part lid when blending
(unless the tamper is inserted through the lid plug opening).
3. With the motor off, set the dry blade container on the motor base by aligning it
over the centering pad. Do not ever attempt to put a container on an operating
motor base or to operate a motor base without a container properly in place.
4. To begin, make sure the On / Off switch is in the On position.
5. Use the Variable Speed dial to select a function.
• Variable Speed: Rotate the dial right of center to Variable Speed 1.
• Programs: Rotate the dial left of center to the desired program.
6. Activate the blender by pressing the Start / Stop Switch. Your container will shift
and get into an aligned position.
• Variable Speed: slowly increase the Variable Speed to the desired speed.
• Programs: The programs vary in blending speed and duration and will
automatically stop at the end of the program. Programs can be interrupted
by pushing down the Start / Stop switch at any time. If reactivated by pushing
down the Start / Stop switch, the program will start at the beginning.
40
OPERATING INSTRUCTIONS
CAUTION
Never Start on Speeds Above 1 with Hot
Liquids to Avoid Possible Burns.
Escaping steam, splashes or contents may scald.
To secure the contents, lock the lid and lid plug
securely in place prior to operating the blender.
Always start on Variable 1, slowly increase to 10.