Cleaning And Maintenance; Filter; Main Unit - Sharp IG-BC2U Manual De Funcionamiento

CLEANING AND MAINTENANCE

FILTER

The fi lter must be cleaned regularly in order to maintain the ion density.
Filter soiling depends on the usage environment, so clean the fi lter about once
a week or whenever the fi lter is clogged, even if the Filter Clean Light has not
turned on.
Gently remove dust
1
f r o m t h e f i l t e r o f
back side by using a
vacuum cleaner.
• Do not press the vacuum cleaner strongly against the fi lter, or the fi lter could be damaged.
• If using synthetic kitchen detergent, rinse well to remove all traces of the
detergent. Also, be sure to dry the fi lter in the shade.
Once cleaning is completed,
2
connect the car adapter, then
press and hold in the Reset
Button for at least 3 seconds to
turn off the fi lter clean light.
E v e n i f t h e F i l t e r
Clean Light is off,
press and hold in the
Reset Button for at
least 3 seconds after
cleaning.

MAIN UNIT

Wipe with a dry soft cloth.
<For Stubborn Dirt>
Every week or more often if necessary
<For Stubborn Dirt>
• Remove and rinse in water. (Use a soft sponge if
the dirt does not come off easily.)
Be careful the cushioning material does not come
off.
Rinse
Filter
RESET
(Press 3sec.)
MODE
Every month or more often if necessary
t>
Use water and a mild detergent. And then, wipe
with a wet cloth. Make sure to dry out the main unit.
Wipe with a dry cloth.
(Dry in the shade.)
Filter Clean Light
Filter Clean Light will be lit after
approx. 3 month (approx. 720 hours),
when operated 8 hours a day.
Reset Button
Filter Clean
Light
When the Reset Button is pressed and
held in for at least 3 seconds, the light
fl ashes twice then turns off.
E-12
Reattach
RESET
FILTER
CLEAN (Press 3sec.)
UNIT
MODE