Product Description; Designations Of The Components Shown (Figure A - D) - ABNOX AXDV-P1 Manual De Instrucciones

EN
• Insufficient monitoring of machine components that
are subject to wear.
• Improper repairs and using third-party components.

Product Description

Intended Use
The impulse valve is a fast-switching, pneumatically
controlled high-performance needle valve for the
contactless application of sprayable lubricants in con-
tinuous or intermittent operation. Aggressive media
such as acids, bases, cleaning agents, chemicals
and the like must not be sprayed/pulsed under any
circumstances.
Labelling
The impulse valve is labelled according to the model
code (Figure A/No. 6).
Function
Alternating activation of the air piston (electric 4/2-
way magnetic valve) opens and closes the nozzle
needle directly on the nozzle output. Short paths
within the entire air supply system and this switching
magnetic valve permit up to 100 switching cycles
per second. When the control air supply is shut off
or fails, a spring closes the valve. The lubricant is
supplied to the valve from a pressure reservoir or by a
pump depending on the viscosity.
20
Designations of the components
shown (Figure A – D)
1 Medium output, standard nozzle 0.3 mm
2 Connection block
3 Medium input G1/8"
4 Electric 4/2-way magnetic valve
5 Locking screw
6 Type plate
7 Dosing screw
8 Pneumatics connection
9 Magnetic valve electrical connection
10 Mounting bores M4x6mm