Additional Functions - OK. OTD 28111 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 36

ADDITIONAL FUNCTIONS

Setting the drying time (Zeit)
For special drying processes, e.g. a few small clothes, e.g. socks, the drying can be adjusted
9
manually by setting the drying time. Chose program mode Warm (1) and set the suitable time
between 20-60 minutes by switching button Time (Zeit) (2).
Delayed drying (Startvorwahl)
10 If you wish to postpone the drying process a time delay can be set. Use the button Delay
(Startvorwahl) to set a postponed start between 1-24 hours. The dryer starts the drying process
after the preset time elapsed.
1. Fill the drum with your clothes and close the door.
2. Switch ON the appliance with On/Off switch (Ein/Aus).
3. Chose your program and an additional function if needed (e.g. Anti-Crease and/or Gentle).
4. Push button Delay (Startvorwahl) for as many times as needed to set the time delay in hours (H)
as shown in display.
5. Push button Start/Pause. The dryer is activated and will start the drying process once the preset
time has elapsed.
6. Push button Start/Pause to pause the timer. For cancellation push On/Off switch (Ein/Aus).
Child protection (Kindersicherung)
11 Once the child protection is activated, setting cannot be changed. In that case the dryer can only
be switched OFF by pushing On/Off switch (Ein/Aus).
1. Activation: Press anti grease (Knitterschutz) and gentle (Schonen) at once and for more than 3
seconds. The display shows child protection (Kindersicherung).
2. De-activation: Press again anti grease (Knitterschutz) and gentle (Schonen) at once and for
more than 3 seconds. The information child protection (Kindersicherung) in display disappears.
Anti-crease function (Knitterschutz)
12 This function is used to minimize the appearance of crease after drying process is finished.
The standard time for this function is 30 minutes or 120 minutes (selected). The drum rotates
intermittently in order to minimize formation of crease.
• Press Anti Crease (Knitterschutz) and the related LED lights on.
Gentle drying (Schonen)
13 The drying process is working at lower temperatures to avoid damaging sensitive clothes and
textiles. This function is not available in program modes Warm (Warm), Cool (Kalt) and Refresh
(Auffrischen)
• Press Gentle (Schonen) and the related LED lights on.
IM_OTD28111_150320_V04_HR.indb 32
32
20/3/15 6:29 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido