Troubleshooting Guide - DeWalt DW071 Manual De Instrucciones

FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-D
replacement.

Troubleshooting Guide

WALT for a free
E
This guide is intended to assist you in determining why the laser is not
operating to your expectations. These are some of the most com-
monly asked questions or observances. If you still have questions or
problems with your D
this Troubleshooting Guide and instruction manual, call our toll free
Hot Line at 1-800-4-DEWALT or visit one of our service centers.
THE LASER WILL NOT TURN ON.
Ensure that fresh batteries are properly inserted into the tool. TIP: See
"Installing the Batteries" section. Rotate the ON/OFF VARIABLE
SPEED Knob clockwise to turn the power on. TIP: See "Control
Panel" section. If the laser still doesn't turn on, take the tool to a
D WALT service center.
E
THE LASER TURNS SLOWLY OR HAS TROUBLE ROTATING.
Freezing temperatures adversely effect the performance of batteries.
Therefore the laser and batteries should not be stored in freezing con-
ditions. If the tool has been stored in extremely cold conditions, run-
ning the laser for a few minutes will bring the unit up to proper work-
ing temperature.
AFTER TURNING THE LASER ON, 2 LASER DOTS ARE
PROJECTED FROM THE ROTARY HEAD.
The DW071 Rotary Laser has been designed with dual, side by side
laser diodes. Two diodes allows the laser to avoid blind spots which
could potentially be created by the protective cap over the rotary head
and also produce an extremely bright beam when the rotary laser
head is spinning.
11
WALT laser after completely reading through
E