Screen "Set Time And Date; Screen "Setting Parameters; Screen "Exit - CEMO CMT10 Manual De Operación Y Mantenimiento

3.4.1.8 SCREEN "SET DATE & TIME"
MESSAGE "DATE"
dAtE
press to update the date and time of year 00
select the year with
and wait 01 month
Select the month
and wait for day 01
select the day with
and wait 00 hour
select the hour (in 24h format) with
and wait 00 min
select the minutes with
and wait.

3.4.1.9 SCREEN "SETTING PARAMETERS"

MESSAGE "SETPAR"
SetPAr
Some factory default parameters could be modi-
fied by the manager; it is very important to do this
with extreme care to avoid system malfunctions.
Here after, there is a table with modificable param-
eters while within the MASTER mode. To do this,
it will be necessary to press
in "setpar" mode, select pressing
parameter(s) to modify and press
modification; it is only possible to increment the
value pressing button; this is a loop, keep
pressed until you have the desired factor on
screen;
and
and
and
and
and
button to enter
button the
to enter in
00-001: reset partial screen while approaching
TAG only.
-000: reset partial screen while pressing
01-000: not used
02-000: not used
03-002: double horizontal Reed switch reading
(vibrations elimination and flow direction
control)
-000: non useable
-001: single horizontal Reed switch
(not recommended)
04-010 minimum pulse count to consider
the transaction
05-060: seconds to initiate the transaction
after TAG authorization(default 60)
06-020: seconds after the transactions is
completed or missing pulses to
switch off the pump
07-001 pump number to be registered
for PC download
08-???: first digits from machine code
(automatically saved when approaching
MASTER card at first use)
09-???: next digits from machine code
(automatically saved when approaching
MASTER card at first use)
3.4.1.10 SCREEN "EXIT" MESSAGE "EXIT"
AND RESET DISPLAY
EXIt
This function permits to exit from MASTER mode
and provokes a display reset. If no display reset is
desired, just wait 60 seconds.
Else press once when display shows "exit.
GB
13