Safety Instructions - Rothewald 10018717 Instrucciones De Uso

as improper use of this product or its unsuitability for a vehicle could impair the
safety of the vehicle and/or damage it.
The Rothewald Torque spark plug sockets release signal must only be used as
described in these instructions. Any other use is considered improper use and
may result in material damage. The manufacturer and supplier accept no liability
for damage caused by improper or incorrect use.

3.2 | Safety instructions

WARNING!
Danger for children and persons with reduced physical,
sensory or mental abilities (e.g. partially disabled persons,
elderly persons with limited physical and mental abilities) or
lack of experience and knowledge of handling motorcycles
(e.g. older children)!
• The packaging film must be kept away from children, as there
is a risk of suffocation.
• The use of Rothewald Torque spark plug sockets release
signal requires specialist technical knowledge in the motor
vehicle trade.
IMPORTANT!
Risk of damage
• Spark plugs tightened with the incorrect tightening torque
can damage the thread and, in extreme cases, can break off,
resulting in expensive repairs. Always check which tightening
torque the vehicle manufacturer specifies for the spark plugs
of the vehicle.
• If during the tightening process it appears that a spark plug is
unable to withstand the tightening torque or it feels "soft" or
similar, stop tightening it immediately. The thread is probably
faulty. Check the components before the thread breaks off
and the spark plug becomes very difficult to remove.
• Do not use the Rothewald Torque spark plug sockets release
signal to unfasten spark plugs. This can have a negative
effect on the accuracy of the spark plug socket or damage it.
• If you are not yet used to using the tool, you should first
familiarise yourself with the way it is triggered.
12