Protos Integral Instrucciones De Uso página 7

7
ger
on.
y
your
erve
tion.
10
12
8
9
There are two more fasteners at
the front of the chin strap (Fig. 6).
Snap both of these into the sockets
on both sides (circles). Lock them
into place by pulling slightly, so
that they point to the inside of the
helmet (Fig. 11).
11
Make sure the tension
of the chin strap is the
same on both sides!
13
Push the "back snap faste-
ner" into the socket in the
back under the neck
on the inside of the helmet
by pushing down hard.
Now pull the chin strap through
the guides on both sides of the
back part of the neck guard (to
do so, it is best to push the neck
guard outwards again).
Once you have made fi nal
adjustments to your chin
strap, the excess part of the
strap can be cut off and the
cut edge can then be melted
using a lighter.
guard
07