Brother 2340CV Manual De Instrucciones página 18

16
(3) While firmly taking the fabric with your hand, push the
thread release button to the right for the needle thread
currently being used to open the thread tension disc.
NOTE:
Do not take the seam.
Be careful when taking the fabric since the light
bulb is very hot.
(3)
(4) Slowly pull the fabric in the direction of the arrow with (3).
NOTE:
Be sure to pull the fabric to the back.
(4)
(5) Cut the needle thread which comes out on the upside
of the fabric.
(5)
(6) Again, slowly pull the fabric in the direction of the
arrow, so that the end of the needle threads are pulled
out behind the fabric.
(6)
(7) Cut the looper thread.
(7)
(8) All threads are pulled at the back.
Tie all threads together and cut.
(8)
CAUTION