Preparation Before Threading - Brother 2340CV Manual De Instrucciones

II. Preparation before threading
Thread tree
1
2
3
Thread spool
The procedure for placing the spool of thread on the spool pin differs according to the shape of the spool.
Type A
1
2
3
Needle position
(1)
(2)
8
4
If you are sewing with loosely
spun nylon thread, we recom-
mend that you cover the spool
with the net supplied to prevent
the thread from slipping off the
spool.
Adapt the net to the shape of the
spool.
1 Spool support
2 Spool cushion
3 Net
Raise the telescoping thread tree to its highest position.
Make sure that the thread holders are in alignment above
the spool pins as illustrated left.
1 Thread holder on thread tree
2 Spool pin
3 Spool cushion
4 Correct position
Type B
1
(1) Turn off the main power switch for safety.
(2) Set the needle bar in its highest position by turning the
handwheel toward you.
Turn the handwheel to find the easiest position for
threading.
3
1 Spool support
2 Spool mat
3 Spool cap
2