mspa Mont Blanc Manual Del Usuario página 23

PROBLEM
FILTER PUMP
DOES NOT WORK
SPA TUB IN AN
ABNORMAL
SHAPE
SPA LEAKING
SPA LOOSES AIR
PRESSURE
WATER NOT
CLEAN
CONTACT YOUR LOCAL MSPA DEALER OR SERVICE CENTER FOR ANY PRODUCT RELATED QUESTIONS OR PROBLEMS.
CAUSE
Filter stuck by dirt or other objects
Filter system failure
Extra air pressure by strong
sunshine
Spa inlet/outlet connection not
securely tight
Drainage valve is not closed
completely
Water leaks from the spa pool body
Air valve got loosen
Hole or split on the spa tub
Water has been used too long
Insufficient filtering
Dirty filter cartridge
Improper water maintenance
Clean or replace the filter cartridge
Contact the MSpa Service Center
Check the air pressure and release some air
if necessary.
During hot weather, it is recommended to
check if it is necessary to release some air to
avoid any possible damage to the spa pool
Tighten the inlet and outlet connection
Contact the MSpa Service Center
Repair the leaking hole/spilt with
the repair kit material
Fill up the tub with air, make sure the air
valves are secure, replace if necessary
Put soap water in a squirt bottle and spray on
seams. If there is a leak it will bubble. After
you find the leak, clean and dry the leaking
area, then use the repair patch comes with
your spa. Check the repair section on P20
Change the water
Increase filtration frequency
Clean or replace the filter cartridge in time
Refer to the chemical manufacture's
instruction
23
SOLUTION