Cleaning And Storage - BOMANN BS 971 CB Instrucciones De Servicio/Garantía

Important note!
• Cleaning may become necessary after a shorter time, depending on the condi-
tions of use, e.g. when vacuuming fi ne dust.
• If the suction power of your vacuum cleaner diminishes please clean the fi lters
as described.
• If the suction power suddenly diminishes during operation this may be due to
the fi lters being locked.
Cleaning
• Pull the plug out of the socket before cleaning!
• Clean the casing with a dry cloth.
• Clean the motor protection fi lter approximately every 10. time the vacuum
cleaner is emptied. Clean the fi lter in hot water without additives. Put it back
into place only once it is completely dry.
Storage
• Let the iron cool down completely.
• Wind the cable completely.
• Insert the hook of the nozzle on the back of the device into the parking aid (14).
• If you position the device horizontally: Please insert the hook of the fl oor nozz-
le into the parking assistant on the rear of the device.
• If you position the device vertically: Please insert the hook of the suction tube
into the parking assistant on the bottom of the device.
05-BS 971 CB 65
Outlet fi lter (13)
The appliance is also equipped with an outlet fi lter.
In order to ensure that the fi lter works correctly, we
recommend that you replace it every six months. It is
located on the rear part of your appliance behind a
ventilation grid. Open the ventilation grille by pressing
the lever on its side. Then pull the grille out towards
the front. Remove the fi lter and clean as described
above. Fit the fi lter back into place and close the
ventilation grid by following the steps above in the
opposite order.

Cleaning and storage

GB
65
15.08.2005, 10:26:23 Uhr