Normal Operation - SATA HRS Instrucciones De Servicio

Operating Instructions SATA HRS
EN
Notice!
Use a compressed air connection with 1/4" outer thread or suitable
SATA connection nipple.
Use clean compressed air, for example with SATA filter 484 (Art. No.
92320).
■ Check that all screws are screwed tight.
■ Connect compressed air supply line to air connection [1-12].

9. Normal Operation

Before using the pressurized cup spray gun, the manufacturer must be
consulted regarding the suitability of the specific cleaning agents and
preservatives.
9.1. Operation
Warning!
Risk of injury from the wand whipping around
In combination with the compressed air, the material being sprayed can
cause the wands to whip around and cause injuries.
→ Before pressing the trigger guard, hold the wands securely and se-
cure them to prevent them from whipping.
Attention!
Damage from using the wrong cleaning agents to clean the
pressurized cup spray gun
The pressurized cup spray gun can be damaged by using aggressive
cleaning agents to clean it.
→ Do not use aggressive cleaning agents.
→ Use neutral cleaning agents with a pH of 6 – 8.
→ Do not use acids, caustic solutions, bases, paint strippers, unsuitable
regenerates or other aggressive cleaning agents.
→ Check the used cleaning agents with the manufacturer of the chemi-
cals that you are using.
118