Cameo AURO BAR 100 Manual De Usuario página 17

SETTING THE OPERATING MODE (Mode)
Pressing the MODE button will take you to the selection menu for system settings. Using the arrow buttons, select the menu item "Mode" (dark
background) and confirm by pressing ENTER. The digits which show the operating mode (for example DMX 39CH), change their colour to red, and
you can use the + and - buttons to select the desired operating mode. Confirm the process with ENTER and press the MODE button to return to the
main display.
Operating modes: DMX 9CH, 29CH, 19CH, 39CH, Slave, Auto, Static.
System Settings
DMX Address 001
Mode DMX 39CH
Settings
Network Setting
System Info
DMX MODE (DMX)
Four different DMX modes are available for selection: 9-channel, 19-channel, 29-channel and 39-channel (DMX 9CH, 19CH, 29CH, 39CH). The setting
is made as previously explained in section SETTING OPERATING MODE. You will find tables with the channels of the different DMX modes in this
manual under DMX CONTROL.
Mode DMX 39CH
SLAVE MODE (Slave)
The setting is made as previously explained in section SETTING OPERATING MODE. Connect the slave and the master unit (same model) with a DMX
cable. Enable one of the standalone modes (Auto, Static) in the master unit. Now the slave unit follows the master unit.
Mode Slave
AUTO MODE (Prog1 - Prog8)
The 8 various auto programs consist of a sequence of fixed programmed colour and motion changes.
Pressing the MODE button will take you to the selection menu for system settings. Using the arrow buttons, select the menu item "Mode" (dark back-
ground) and confirm by pressing ENTER. The digits which show the operating mode change their colour to red, and you can use the + and - buttons
to select the desired Auto operating mode. As soon as you confirm with ENTER, the currently selected Auto program is started. Press ENTER again,
then use the + and - buttons to select one of the 8 Auto programs (Prog1 - Prog8) and confirm with ENTER. Now use the arrow buttons to select the
"AutoSpeed" menu item to adjust the program speed as desired. Press ENTER to confirm, and adjust the speed from 000 to 255 by using the + and -
buttons. Confirm with ENTER and press the MODE button 3x to return to the main display.
Mode Auto
Auto Mode
Auto Prog 8
AutoSpeed 225
STATIC MODE (Static)
In the same way as with a DMX control unit, the static mode allows you to adjust all functions such as Pan, Tilt, Dimmer and Strobe directly on the
device with values from 000 to 255. Thus, a scene can be created without an additional DMX controller. Pressing the MODE button will take you to
the selection menu for system settings. Using the arrow buttons, select the menu item "Mode" (dark background) and confirm by pressing ENTER.
The digits which show the operating mode, change their colour to red, and you can use the + and - buttons to select the desired static mode (Static).
After you have confirmed with ENTER, the parameters can be selected using the arrow buttons (see list). Press ENTER. The value of the parameter
can now be changed using the + and - buttons. Confirm the input with ENTER. Once all of the parameters have been set as required, press the
MODE button several times to return to the main display.
17