Operating Controls - Stanley Fat Max CL2 Manual De Instrucciones

OPERATING CONTROLS

Fig. 1
1 POWER button
2 Laser mode indicator (LED)
3 Laser output window
4 Battery compartment (under rubberized sleeve)
• Heavy Duty magnetically dampened compensator eliminates error by
quickly self-leveling the laser.
• Out-of-leveling range sensor triggers the beams to automatically blinks
when the unit is moved out of its ±4° self-leveling range.
OPERATION
1. Set the unit on a flat, smooth surface. The self-leveling range of the
instrument is within approx. ±4° in any direction.
2. Turn the unit on by pressing the POWER button. The indicator light
should illuminate "green" if the unit is within its leveling range.
If the indicator light illuminates "red" and the laser cross is flashing, the
unit is out of its self-leveling range. Position the unit to a more level
surface.
2a. If the unit appears to be within its self-leveling range and the LED
continues to blink, be sure the unit contains good batteries.
3. If the unit fails to operate after completion of steps 1-2 above, contact
customer service.
4. Turn the unit OFF by pressing the POWER button as it takes to cycle
through the various functions before coming to the OFF position.
EN
CL2 • 3