Fig. 2
1. Horizontal
2. Vertical
3. Laser Cross
4. Tilt "Manual Mode"
5. Off
A. LED light illuminates green when unit is ON
B. LED light illuminates red in Manual Mode
C. LED light illuminates red and lasers blink when out of
leveling range
POWER
Your CL2 will provide approx. 25 hours 1 diode on, 20 hours
2 diodes on, of intermittent use with three "AA" cell bat-
teries. If your laser emits dim laser beams, replace the
batteries.
Remove the rubberized sleeve from the housing. Remove
the battery cover from the battery compartment. Insert
the batteries or replace the used
batteries with new ones. Check for correct polarity. (Fig. 3)
Do not use rechargeable batteries!
Extreme temperatures and the use of batteries with differ-
ent levels of charge can reduce the operating time of the
instrument.
Always use batteries with the same power rating and from
the same manufacturer.
For disposal of the used batteries, see the section
"Environmental Protection".
4 • CL2
Fig. 3