Orderman Setup - Unit Settings - Orderman DON Manual De Instrucciones

Hand-held Unit
The operation and configuration of the function keys as well as the
touch-pad is described in the handbook of your POS-System soft-
ware.
Tip
6 ORDERMAN
Press on any position on the ORDERMAN
ously on the On/ Off button until "Calibrate ..." appears on the upper left of the
display.
Now release the On/Off button.
Then press the On/Off button once again and you will be in the ORDERMAN
setup menu.
You can choose from the following settings in the ORDERMAN
Setting the Touch Calibration
Touch calib.
With the touch-pen, first touch the four crosshairs in the display area, then the
four points on the menu card. (The sequence is indicated in the display.)
Only precise calibration insures precise operation.
Information
Setting the Display Contrast
Contrast
Using the touch-pen, you can change the display contrast by dragging on the
bar in the bar field. (There are 3 control fields for checking optimal settings.)
® ® ® ® SETUP – Unit Settings
21
® DON touch-surface and simultane-
Instructions for use
®
setup:
® ® ® ®