Changing The Battery - RK Rose+Krieger RkMultiControl Instrucciones De Montaje

6. Life Phases

6.6 Changing the battery

If functions can no longer be carried out using the remote hand switch, you have to change the
batteries.
•
Insert a coin 1 in the notch on the top side of the re-
mote hand switch
•
Turn the coin diagonally and carefully press the hal-
ves of the hosing apart.
•
Change the battery. Note the correct poles. Only use
type CR 2032 batteries!
•
Press the housing halves back together.
Always observe the precautions in order to avoid damage to the remote hand switch:
•
Always remove the cover carefully!
•
Unsuitable batteries may damage the remote hand switch. Always only replace the bat-
teries with new batteries of type CR2032.
•
Make sure that the batteries are always inserted correctly.
•
The board inside the remote hand switch must not be touched, soiled or damaged or
brought into contact with water.
30
1