Intended use
5
Intended use
The PerfectWall PW3800 awning is suitable for installing on motorhomes or
caravans.
The awning must only be used whilst the vehicle is stationary. Please observe the
operating manual.
6
Installing the awning
6.1
Required installation material
For the installation of the awning, you will need:
• Various tools, e.g. screwdriver
• A suitable flexible adhesive/sealant, e.g. Sikaflex
• A cleaning agent that is recommended for use with the adhesive
• A primer that is recommended for use with the adhesive
• Acid-free silicone
6.2
Notes on the installation position
When choosing the installation location, observe the following:
!
WARNING!
• Keep a sufficient distance from objects or other vehicles. Once it is
retracted, it should be at least 40 cm away from other objects and
vehicles.
• Ensure the wall of the motorhome can safely take the weight of the
awning before installation. Otherwise, the awning may become
unstable and bend or break.
A
NOTICE!
• Make sure that the inner screw joints are accessible.
• Only attach the awning to flat and vertical wall surfaces (fig. 2 and
fig. 3, page 1). On curved wall surfaces, the mounting plates need to
be adequately lined under the fastening points.
6
®
-252
PW3800
EN