Confirming The Bluetooth Address Of The Printer; Changing The Passkey - Sony UPX-C300 Manual De Instrucciones

Confirming the Bluetooth Address
of the Printer
1
1
DIGITAL PHOTO PRINTER
1
Turn on the printer.
2
Press the MENU button.
3
Press V of the control button to display "Bluetooth
SETTING [>>]."
4
Press B of the control button.
The Bluetooth address appears.
To return to Ready, press the MENU button.

Changing the Passkey

The same passkey is set for all cameras and printers at
the factory. If the passkey needs to be changed, set a new
passkey, following the procedures below.
Once a new passkey is set, remove the printer
registration, and register it again. Then authentication of
the new passkey will be valid.
For details on removing a printer, see "Removing a
Printer" on page 59, and on registering a printer, see
"Adding/Registering a Printer" on page 57.
Changing the passkey of the camera
1
Display the SETUP menu.
For details, see "Displaying the SETUP Menu" on
page 28.
2
Press v or V of the control button to select
Bluetooth.
3
Press the ENTER button.
The Bluetooth Menu display appears.
4
Press v or V of the control button to select
CHANGE PASSKEY.
54
Setting the Bluetooth Functions
2 3,4
MENU
EXEC
PRINT
ALARM
5
Press the ENTER button.
The CHANGE PASSKEY display appears.
Bluetooth
CHANGE PASSKEY
CURRENT KEY : 1234
NEW KEY :
OK
6
Press b or B of the control button to select a digit
you wish to change.
7
Press v or V of the control button to set the value.
A value 0 to 9 can be used.
Repeat Steps 6 and 7 above to set a four-digit
passkey.
8
Press B of the control button to select OK.
9
Press the ENTER button.
A new passkey has been set, and the display returns
to Bluetooth Menu.
To cancel changing the passkey setting
In Step 8 above, select CANCEL instead of OK, then
Press the ENTER button.
Changing the passkey of the printer
1
Turn on the printer.
"Ready BT RSSI [----]"appears on the operation
display.
2
Press the MENU button.
3
Press V of the control button to display "Bluetooth
SETTING [>>]."
4
Press B of the control button.
"Bluetooth ADDR" appears.
5
Press V of the control button to display "PASSKEY
INPUT [>>]."
6
Press B of the control button.
"PASSKEY INPUT <1> [X:X:X:X]" appears.
(<1>: Current digit to be set, [X:X:X:X]: Passkey)
1 2 3 4
CANCEL
MOVE VALUE