Hayward LPCUS11 Serie Manual De Uso página 13

Operating the Universal ColorLogic
The Universal ColorLogic light is controlled through power-cycling: a method of changing light programs which requires no special controller or interface. To
activate the light, simply turn on the switch. To deactivate the light, turn off the switch. To advance to the next light program (fixed color or color show), turn the
switch off, then back on within 10 seconds.
When the light has been off for over 60 seconds, and is first turned on, it will come on to white for 15 seconds for quick clear view of your pool, then go to the
last fixed color or color show it was running.
Light Synchronization
If your pool or spa has multiple Hayward Universal ColorLogic LED lights, they may be operated independently, or they can be easily synchronized so they will
all display the same colors and shows at the same time. For light synchronization, all lights must be wired to the same switch. Once installed, all lights should
be automatically synchronized, however, if they get out of sync, they can be re-synchronized easily. To re-synchronize your lights, turn the switch on, then back
off, then wait between 11 and 14 seconds and turn the switch back on. When the lights come back on, they should enter program #1, and be synchronized.
Programs
When in Universal ColorLogic mode (default), the Universal ColorLogic light has the capability to display 17 different programs; 10 fixed colors and 7 color-
changing shows. These programs are advanced using power-cycling (quickly powering the lights on, then off, then back on). The programs are listed below:
1. Show-Voodoo Lounge
2. Fixed-Deep Blue Sea
3. Fixed-Royal Blue
4. Fixed-Afternoon Skies
5. Fixed-Aqua Green
6. Fixed-Emerald
7. Fixed-Cloud White
8. Fixed-Warm Red
9. Fixed-Flamingo
10. Fixed-Vivid Violet
Refer to the included color card as a quick reference to the available programs.
Omni Direct (Lights built after June, 2018)
LPCUS11xxx and LSCUS11xxx Universal ColorLogic lights must be configured and controlled by a Hayward OmniLogic or OmniHub pool control to use Omni
Direct mode. This mode offers some unique colors as well as speed and brightness control. The programs are listed below.
1. Show-Voodoo Lounge
2. Fixed-Deep Blue Sea
3. Fixed-Royal Blue
4. Fixed-Afternoon Skies
5. Fixed-Aqua Green
6. Fixed-Emerald
7. Fixed-Cloud White
8. Fixed-Warm Red
9. Fixed-Flamingo
Refer to the OmniLogic or OmniHub manuals for Omni Direct configuration and operation information.
Networking
Using a ColorLogic modem AQL-COLOR-MODHV and Coupler LKBUN1000, owners of Hayward Pro Logic PS pool/spa controllers using software version 4.45 or
greater can network their LSCUN11xxx and/or LPCUN11xxx Universal ColorLogic light(s), allowing them to fully control the color, speed, motion and brightness
of preset light shows. If the lights will be networked, refer to the AQL-COLOR-MODHV ColorLogic Network module for programs and operation instructions.
11. Fixed-Sangria
12. Show-Twilight
13. Show-Tranquility
14. Show-Gemstone
15. Show-USA
16. Show-Mardi Gras
17. Show-Cool Cabaret
10. Fixed-Vivid Violet
11. Fixed-Sangria
12. Show-Twilight
13. Show-Tranquility
14. Show-Gemstone
15. Show-USA
16. Show-Mardi Gras
17. Show-Cool Cabaret
18. Fixed-Yellow
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
19. Fixed-Orange
20. Fixed-Gold
21. Fixed-Mint
22. Fixed-Teal
23. Fixed-Burnt Orange
24. Fixed-Pure White
25. Fixed-Crisp White
26. Fixed-Warm White
27. Fixed-Bright Yellow
13