Operating
the Dishwasher
(ooo.o.o¢
Canceling
or Changing
a Cycle
To cancel or change
a cycle, open the
dishwasher
door far enough to expose the control
buttons
then press and hold for three seconds
the
two buttons
labeled "Cancel
Drain" as shown
in
Figure 26.
Figu re 26
o _Cance[
Drain_
®
Wait approximately
one minute, then press the
On/Off
button
You may now begin a new cycle.
Child
Safety
Latch
(model
SHE660
only)
Your dishwasher
is shipped
from the factory with
the Child Safety
Latch disengaged
and in the
normal
operating
mode. Pull on the door handle to
open the door. The Child Safety latch activation
lever is located
in the recess for the door handle.
You must look up into the recess to find the Child
Safety
Latch activation
lever (see Figure 27).
To activate the Child Safety Latch insert a
matchstick
or other non-metal
object into the
opening
as shown
in Figure 27. The activation
lever will release
and move toward the left.
You have now activated
the Child Safety Latch.
Each time you open the dishwasher
door you will
need to shale the activation
mever to the right
to release the door locking mechanism,
you can
then pull the door open (See Figure 28). After you
open the door you should
release the Child Safety
Latch Activation
lever and let it slide back toward
the left.
To deactivate
the Child Safety Latch insert a
matchstick
or other non-metal
object into the
opening
as shown
in Figure 29. Slide the
activation
level to the right and hold. Remove
the
matchstick
and release the lever. The feature
has
now been deactivated
and you can open the door
by pulling the handle.
Figure 27
\
/
Figure 29
14
Figu re 28