Twin Star 18DM1141 Manual De Instrucciones página 4

4. Locate Center Back Panel (H), insert one
Wood Dowel (N) into each of the
pre-drilled holes. Attach the Center Back
Panel to the completed assembly from
step 3. Then use Bolts (L) and Washers
(M) through the pre-drilled holes in the
mounting blocks.
HAND TIGHTEN ONLY.
5. Locate Hearth/Base (A) and set out
f nished side up on the f oor.
6. Insert one Wood Dowel (N) into each
of the pre-drilled holes.
7. Attach the completed Front panel
assembly from step 4 to the
Hearth/Base (A). Make sure the dowels
are seated into the pre-drilled holes in
the Hearth/Base. Using Bolts (L) and
Washers (M) attach panels through
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
E-3
Center Back Panel
N
M
L
N
M
L
Completed
Front Panel
Assembly
L
M
N
N
Hearth/Base
A
H
N
M
L
N
N