Publicidad
Idiomas disponibles
Idiomas disponibles
P L E A S E R E A D A N D F O L L O W A L L S A F E T Y T I P S
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure
you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
to include your name and address.
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
Attach the f
quality Phillips head screwdriver
1. Dust your f ireplace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your f ireplace with a gentle non-abrasive household cleaner. Make sure to dry your
fireplace immediately with a soft cloth or towel.
For a complete tight fit every bolt
should have a flat washer. First slide a
flat washer onto the bolt.
All panels are labeled Left and Right as viewed
from the front of unit.
1. Locate the Center Front Panel (D), Right Front
Panel (C) and Left Front Panel (B) and set out
face down on a scratch-free surface.
2. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
3. Push the Right Front Panel and Left Front Panel
snug to the Center Panel. Make sure the Wood
Dowels are seated in the pre-drilled holes. Insert
Bolts (L) and Washers (M) into the holes in the
mounting blocks.
HAND TIGHTEN ONLY.
E-2
GETTING STARTED
or call 1-866-661-1218 in English, 1-866-374-9203 in French
Please identify the parts you need and model number. Make sure
CAUTION:
HELPFUL HINTS
f ireplace, take your time and use the hardware provided and a
CARE & CLEANING
TALL
L
Center Front
Panel
N
D
N
C
Right
M
Front
L
Panel
N
N
B
Left
N
Front
Panel
N
Publicidad
