Changing Your System Setup Unify ® System Overview; Using The Unify Menu - Bose Lifestyle SoundTouch 535 Guía De Uso

Changing Your System Setup
UNIFY system overview
®
The UNIFY intelligent integration system guides you through the initial process of
setting up and configuring your system. It helps you choose the right cables and
inputs, and program the Bose
After completing the initial setup, you can use the UNIFY system at any time to
change your system setup and configuration.

Using the UNIFY menu

To display the UNIFY menu on your TV, press the Setup button on the front of the
control console. Using the navigation buttons on the remote, select the function
you want and follow the instructions on the screen.
Menu item
Resume initial
setup
Restart initial setup Start the UNIFY setup process from the beginning if initial setup is
Reconnect
Acoustimass
®
(Lifestyle
®
SoundTouch 135
™
systems)
Language
ADAPTiQ
®
TV setup
Source setup
Add a new device
Network setup
Update
Teach mode
Exit UNIFY
22 - English
remote to operate your connected devices.
®
What you can do
Return to the UNIFY setup process at the last completed event if
initial setup is incomplete.
incomplete.
Reconnect the soundbar with the Acoustimass module.
Change the language of the on-screen display.
Start the ADAPTiQ audio calibration process. After ADAPTiQ has been
run, this menu disables or enables ADAPTiQ.
After your TV is connected to the console:
• Program the Bose remote to control your TV
• Manually enter remote control IR device codes
• Replace your TV
• Add, change, or remove the TV audio connection
For sources connected to Input 1-5 of the control console:
• Rename the device
• Program your remote to control the device and add the IR emitter
• Manually enter remote control IR device codes
• Remove the device
• Add or change the type of audio or video connection
Add another device or accessory to your system.
Connect your SoundTouch
Perform a system software update (see "Performing a system soft-
ware update" on page 29).
Send IR codes to program a learning remote.
Close the UNIFY menu.
wireless adapter to your system.
™