Maytag MTW5600TQ1 Manual De Uso Y Cuidado página 14

4,
5,
6.
• Dispensers on Timed Bleach models automatically dispense bleach at the proper time
in the cycle for optimal performance, ensuring the cleanest and brightest loads.
Style 1 Style 2
Liquid chlorine Dispenser for
bleach dispenser fTn'led Bleach modek
(on some modek;
Style 3: Without liquid chlorine bleach dispenser/on some models)
• let the washer fill and begin agitating the load.
• Add bleach 5 minutes into the wash cycle for best cleaning and so that bleach can be
removed in the rinse cycle. Pour bleach around the agitator, not directly onto the load
to avoid damaging clothing or other items in the load.
(OPTIONAl.) Add liquid fabric softener.
NOTE: Do not spill or drip any fabric softener onto the clothes. Undiluted fabric softener
can stain fabrics. Always dilute fabric softener with warm water. Using too much fabric
softener can make some items (diapers and towels) nonabsorbent. If this happens, do not
use it in every load, or use less of it in each load.
Style 1: With liquid fabric softener dispenser/on some models)
• Use only liquid fabric softener in this dispenser. Pour measured liquid fabric softener
into the dispenser. Softener is added automatically during the rinse portion of the
cycle. Dilute liquid fabric softener by filling the dispenser with warm water until
liquid reaches the underside of the rim. See max fill line arrows.
Style 2: Without liquid fabric softener dispenser/on some models)
• [n the final rinse only, add fabric softener that has been diluted with 1/2to 1 cup
(125 to 250 m[.) warm water.
Close the washer lid. Washer will not agitate or spin with the lid open.
Turn the [.OAD SIZE or WATER I.EVEI. selector to the correct setting for your wash load
and the type of fabric being washed.
• You may change the load size or water level selection after the washer has started
filling by turning the selector to a different setting.
• On models with a variable Load Size or Water [.evel control, you should turn the
knob to RESET, then to desired setting.
7. Select a Wash [_mperature based on the type of fabric and soil being washed. Use the
warmest wash water safe for the fabric. Follow garment label instructions.
The Automatic Temperature Control (A[C) (on some models) electronically senses and
maintains a uniform water temperature by regulating incoming hot and cold water.
• Even in Cool wash, some warm water is let into the washer to maintain a minimum
temperature of approximately 70°F (21°C).
Temperature Guide
Wash Temp Suggested Fabrics
Hot Whites and pastels
Durable garments
Heavy soils
Warm Bright colors
Moderate to light soils
Cool Colors that bleed or fade
light soils
Cold Dark colors that bleed or fade
I.ight soils
NOTE: [n wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve
well. Soils can be difficult to remove. Some fabrics can retain wear wrinkles and have
increased pilling (the formation of small lint-like balls on the surface of garments).
8. You can customize your wash by adding rinse Options to your cycle selections. This knob
has settings for:
• Extra Rinse - Selecting this option provides a second rinse. An Extra Rinse can be
added to any wash cycle.
• Cycle Signal - A tone will sound at the end of the cycle. The sound level cannot be
adjusted.
• Extra Rinse & Cycle Signal - This option combines both a Extra Rinse and a Cycle
Signal at the end of the wash cycle.
9. The SensiCare P'_System/on some models) is an integrated set of controls which work
together to provide optimal wash temperatures, agitation times, and agitation/spin speeds
based on the Fabric Select setting. The controls provide higher wash temperatures for
more aggressive, heavy-duty cycles and slightly lower temperatures on cycles for delicate
and hand wash items, to provide better fabric care. The timer knob allows you to decrease
agitation time for light soils and increase agitation time for heavy soils.
14-