Sears Kenmore 11659512992 Manual Del Proprietário página 16

Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit,
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting,
TO CHECK BRUSHES:
Base Support Bars
When brushes
are worn to the
level of the base
support bars,
replace the
brush dowel
TO REPLACE BRUSH DOWEL:
t. Remove POWER-MATE
TM
cover, belt and
brush assemb]y See "To remove belt" in
BELT CHANGING AND BRUSH
CLEANING.
2. Remove brush supports, washers,
screws, end brush, brush sprocket pieces
from ends of brush assembly
3. Reassemble brush assembly_ To line up
screw holes in dowel, sprocket and end
brush, be sure the brush portion of end
brush lines up with brushes on brush dowel.
4. Replace belt, brush assembly, POWER-
MATE
TM
cover, light bulb and light cover. See
"To replace belt" in BELT CHANGING AND
BRUSH CLEANINGr
Washer
Brush
Support
Brushes
Brush Dowel
Brush
Sprocket
Flange
I Brush
Sprocket
End
Brush
Brush
Support
Screw
Washer
16