How To Start - Sears Kenmore 11659512992 Manual Del Proprietário

HOW TO START
Personal Injury and Product Damage
Hazard
• DO NOT plug in if switch is in ON
position. Personal injury or
damage could result.
• The cord moves rapidly when
rewinding, Keep children away
and provide a clear path when
rewinding the cord to prevent
personal injury.
- DO NOT use outiets above
counters. Damage to items in
surrounding area could occur,
Cord
Rewind
Bar
t. Pull cord out of
canister to desired
length. The cord
will not rewind until
the cord rewind
bar is pushed°
NOTE: To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug,
one blade is wider than the other° This plug
wild fit in a polarized outlet only one way° If
the plug does not fit fully in the outlet,
reverse the plug,, If it still does not fit, con-
tact a qualified electrician to install the prop-
er outlet, Do not change the plug in any
way.
2. Plug the polarized power cord into a 120
Volt outlet located near the floor.
To rewind: Unplug the cleaner° Hold the
plug while rewinding to prevent damage or
injury from the moving cord. Push cord
rewind bar.
Handle Release
Pedal
Pile Height
indicator
2
eight
3, Lower wand from upright position by
pressing on the handle release pedal.
CAUTION
DO NOT leave the POWER-MATE
TM
running in one spot in the upright
position for any length of time,
Damage to carpet may occur.
4. Select a pile height setting by pressing
the small pedal on the rear of the POWER-
MATETMoThe pile height setting shows on
the indicator. See SUGGESTED PILE
HEIGHT SETTINGS,,
Attention: Refer to your carpet manufac-
turers cleaning recommendations. Some
more delicate carpets may require that they
be vacuumed with the POWER-MATE _ agi-
tator turned off, to prevent carpet damage.
OFF
FLOOR
RP_%'
Select a switch
position on the
handle.,
OFF
FLOOR - turns on the canister motor only.
CARPET - turns on beth the canister and
the POWER-MATE
TM
motors.