Mx Onda MX-VC2640 Manual De Usuario página 128

Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1. Make sure the cooktop is turned on.
Note: you can use the minute minder even if you‟re not selecting any cooking
zones.
2. Touch the "-" or "+" controls of the timer , the minder
indicator will start flashing and "00" will show in the
timer display.
3. Adjust the timer setting by touch the "-" or "+"
controls. The minute minder indicator will start
flashing and will show in the timer display.
Hint: Touch the "-" or "+" control of the timer
once to decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer to decrease or
increase by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically
return to 0 minute.
4. To cancel the timer, touch the "-" or "+" controls of the timer, and scrolling
down to "0", the timer is cancelled, the "00" will show in the minute display, then
and then "--".
5. When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5 seconds.
6. Buzzer will beep for 30 seconds and the timer indicator
shows "- -" when the set time finished.
13