Temperature Measurement - Beta 1760/OHM Manual Del Usuario Y Operador

temPerature measurements
1 Set the function switch to the Temp position.
2 Insert the Temperature Probe into the input jacks, making sure you observe the correct polarity.
3 Press the mode button to indicate "°F" or "ºc"
4 Touch the Temperature Probe head to the part whose temperature you wish to measure. Keeps
the probe touching the part under test until the reading stabilizes (about 30 seconds).
5 Read the temperature on the display.
Note: The temperature probe is fitted with K-type mini connector.
A mini connector to banana connector adaptor is supplied for
connection to the input banana jacks.
72