Parameters Setup - Beta 1760/OHM Manual Del Usuario Y Operador

Parameters' setuP (set)
1. store function
1 Press the RANGE button for 2 seconds to enable the SET function. Then press once shortly to
change the setting content.
Settings include the following (in sequence):
A: upper limit buzzer alarm
B: lower limit buzzer alarm
C: auto power off time
D: turn off phonating
E: back lit time
Use , +, -, buttons to select the parameter
2 Press set button continuously to switch to setting content, till exiting setup to testing mode.
In this way, the updated setting content is saved. If you press the EXIT button during this period,
no setting will be saved.
84