Overview Of The Components; Using The Appliance - BOMANN BS 9010 CB Instrucciones De Servicio

• Do not suck up liquids!
• Do not suck up hot ashes or pointed or sharp objects!
• Do not use the device in damp rooms!
• Never use without the filter. Check that the filter is inserted correctly!
• Hair, clothing and body parts away from the vacuum nozzle during
use!
• Keep the vacuum cleaner away from sources of heat like radiators,
ovens, etc.!

Overview of the Components

1 Telescopic suction pipe
2 Suction power control
3 Cover for extraction filter
4 Top carry handle
5 Cable-winding button
6 Power cord with plug
7 Lever for extending and retracting the brushes
8 Floor nozzle (with hook (not shown))
9 Carrying handle
10 Opener dust bag compartment
11 Hose connection
12 Connection head of the vacuum hose
13 Suction hose
14 Dust bag filling display
15 On/off button
16 Slide for telescopic suction pipe
17 Stowage clip
18 Stowage compartment with crevice nozzle and brush
nozzle
Start-up
• Insert the connection head of the suction hose into the
hose connector until it locks in place. To do so, please
press the buttons simultaneously. In order to release the
hose again, please press the buttons once more on the
connection head.
• Keep the buttons pressed down and then pull out the hose.
• Insert the vacuum tube into the handle if required.
• You can adjust the length to individual requirements using
the slide on the telescopic suction pipe.
• Then assemble the floor nozzle and/or the accessories.

Using the Appliance

1. Unwind the length of cable you require.
26
CAUTION:
• Pull out the cable up to the maximum length indi-
cated with the yellow mark.
• Never pull the cable out up to the red mark as the
cable winding can be damaged.
NOTE:
If the red mark is visible, pull in the cable with the help of
the cable winding button back to the yellow mark.
2. Insert the mains plug into a correctly installed power socket.
Turn the device on by the on/off switch by pressing down
the button.
3. Set the "carpet/hard floor" switch, depending on the floor
covering.
4. Adjust the suction power with the suction power control.
5. Vacuum at a steady speed. There is no need to exert pres-
sure.
NOTE:
Pay attention to the range that can be covered with the
cable length!
Suction power control (2)
• Low suction power:
for curtains, sensitive material.
• Moderate suction power:
for deep pile velour carpets and textile floor covering.
• High suction power:
for robust carpets and floors.
Turn the suction power control clockwise if you want to increase
the suction power.
Air Slide
Open the air slide on the hose handle in order
to regulate the airflow or to clear any particles
sticking to the nozzle.