Step 9: Secure Dishwasher To The Countertop - LG LDS5040ST/00 Manual De Instrucciones

HOW TO ADJUST LEG
y When adjusting the rear legs of the dishwasher, use a Phillips #2 screwdriver to make the adjustments.
y To raise the back of the dishwasher, lower the legs turning the screw in the direction of the arrow printed on the base
of the unit. To lower the rear of the dishwasher, turn the screw in the opposite direction of the arrow.
NOTE
The right and left side rear adjustments are opposite of each other.
y For the front leg adjustments you can use a 1/4" ratchet without a socket. The ratchet can do directly onto the front
leg and turned to the right to raise the front of the dishwasher. Turn the ratchet to the left to lower the front of the
dishwasher. For the front legs the left and right side adjustments work identical.

STEP 9: SECURE DISHWASHER TO THE COUNTERTOP

For countertops made of wood or that will not be damaged by drilling, use Method 1.
For countertops made of granite, marble, or other materials that could be damaged by drilling, use Method 2.
IMPORTANT TIPS
y Cover the filter hole with towels to prevent screws from falling down into the pump.
y Use of a magnetic driver is recommended
FIG. 12
METHOD 1 (Fig. 12)
1. Insert the installation brackets into the slot.
2. Bend the brackets to secure them to the dishwasher
tub.
3. Using the provided screws, secure the dishwasher to
the countertop through the holes in the bracket.
NOTE
Installation brackets and screws can be located in
the silverware basket.
Installation
Screw
bracket
INSTALLATION INSTRUCTIONS
FIG. 13
METHOD 2 (Fig. 13)
1. Remove the plastic caps on the mounted bracket
access holes.
2. Drive a wood screw through the mounted bracket
and into the cabinet frame.
3. Reinstall the plastic caps.
11