Package Contents - Weelko WKB005 Manual De Instrucciones

Package contents

Contraindications
Do not use the device with:
• Patients with hypersensitive skin or severe acne.
• Patients with diabetes, high blood pressure or high
cholesterol.
• Patients with contagious skin infections.
• Patients with pacemakers, patients with implantable
cardioverter-defibrillator (ICD) or any other electrical
or rhythmic heart-regulating device.
Start-up
• Open the box and check that all parts are included
and in good condition. Please keep the original
package for possible service instances.
• Check if the device is in good condition. If there's any
problem, please contact your distributor.
• Locate the device in a clean and well-ventilated area
with a temperature between 5ºC and 40ºC. The relative
humidity cannot be greater than 80%. Make sure no
objects are located within a distance of 5 cm around
the device.
• Do not place any objects on top of the device.
• Place front and rear bottles correctly. To extract the
rear ones, unscrew them. For the front ones, just press
the upper button and they will be easily removed.
• Plug the power cord into the socket and switch on the
device.
• Clean the bottles before filling them with beauty
products. When extracting the bottles for emptying
and cleaning after a treatment, make sure the device
is not in operation, otherwise the beauty product could
enter the housing of the device and may cause damage
to its components.
• If you hear a buzzing sound when the device is in
operation, please check the monitor indicator of the
waste bottle. If the indicator light flashes, empty the
bottles and place them correctly again.
Fill the bottles with the following products:
A: Deep cleaning liquid/agent
B: Moisturizing liquid
C: Disinfectant solution
D: Oxygenic liquid (H2 O2 rear bottle)
HIDRODERMABRASION
Indicated for deep cleaning and for treatments to
remove black spots, acne, dirt from skin and for oily
skins. It is also indicated together with fat reduction
treatments and to increase the skin's elasticity and
tone.
1. Plug the cable into the "Abrasion" side socket. Place
it so that "Open" remains on the upper part of the
cable.
2. Clean the patient's face before treatment.
3. Depending on the area to be treated, insert the
corresponding head into the handle.
4. Depending on the product to be used, turn central
wheel to choose the bottle. For example, if an oxygenic
treatment is to be applied, select letter D.
5. In between treatments with different products,
press and hold for 4-5 seconds the head of the handle
twice with your finger to clean it.
6. Change the head and adjust the suction intensity
depending on the patient's skin and the area to treat.
7. Press the "H2 02" or "Dermabrasion" button on the
screen depending on the treatment to perform. Wait 3
minutes before starting to spray. This function can