8B. Operation Of The Blender Control Unit - ROTOR MEMORY BLENDER 2 Manual De Instrucciones

© Rotor Lips AG

8b. OPERATION OF THE BLENDER CONTROL UNIT

ON (1)
OFF (0)
PULSE
Function buttons (Mode
Manual operation
- To start the appliance move switch to the "ON"
position. The 6 orange function button LEDs
remain on (= Appliance stationary and ready for
operation).
- Move the selector switch to "MANUAL" position.
- Using function button, select the required speed
and start blending.
- To stop the mixer, repress the same illuminated
button (Alternatively the "SAVE/SHIFT" button
can be pressed or the main switch set to "OFF").
Only remove the sound enclousure when all 6 orange LEDs are
illuminated!
Automatic operation
Blending with programmed cycles:
- To start the appliance move switch to the "ON" position. The 6 orange function button
LEDs remain on (= Appliance stationary and ready for operation).
- Move the selector switch to the "MANUAL" position.
20
Instruction Manual
Rotor Memory Blender 2
1 2
7 8
2
1
2
MANUAL
1
3 4
9 10
: 12 Programms / Mode
LED display (Light-emitting diodes):
Appliance stationary and ready for operation:
6 LEDs illuminated
Appliance operates at selected speed:
corresponding LED illuminated
AUTOMATIC
2
5 6
11 12
: 6 speeds)
1
SHIFT
7–12
Save- /
Shift-/Stop-
button