Use; User Panel Functions - Vortice VORT HR 350 EXO Manual De Instrucciones

ENGLISH

Use

The appliance is wired to a special integrated control panel on the machine, the functions of which are described
in detail further on. There is a user panel, which can be used to interact with the appliance as follows:
- switch appliance on/off
- display days remaining until the filter needs to be replaced
- change operating speed
- display temperatures: outdoor and expelled
- reset filter life days remaining after replacement (can be reset at any time)
- reset for various error situations
This model can be used in combination with a Vortice preheater, which must be fitted and set up by the installer.
The minimum distance of the preheater from the appliance is 500 mm.

User panel functions

General: fig. 7
Pulsanti:
1 = F1 UP
2 = F2 ESC
3 = F3 DOWN
4 = F4 SET
Display icons:
a = alarm
b = stand-by
c = no-frost
d = temperature
e = alphabetic character
f = speed
The function of the ESC
button, unless otherwise
stated, is always that of quitting
without saving data.
Switch appliance on/off (Fig.8)
Press and hold button F3: the
panel displays the number of days
remaining until filter replacement,
the icons corresponding to speed,
the alarm icon if applicable and
the no-frost function enabled icon
if applicable.
Press and hold button F3 again to
switch the appliance to standby
mode: the panel displays only the
standby icon and the motors stop
running.
16
7 7
a
F1
1
F5
3
F3
f
8 8
F1
F5
F3
°C
ABC
1 2 3 4 5 6 7
1 2 3 4 5 6 7
b
c
F2
2
esc
d
Prg
e
4
set
F4
F2
esc
Prg
set
F4