Delayed Start - AMBROGIO BASIC Manual De Uso

MANUAL START AND STOP OF THE ROBOT
Place the robot inside the working
area at least 1 m far from the pe-
rimeter wire and from any other
obstacle.
GB
1-Press shortly the "start" (A)
push button.
The (green) led (E) flashes to indi-
cate that the robot is on and it is
in the "pause" mode.
The start of the robot can be car-
ried out with two different modes
(immediate or delayed start).
Immediate start
1-Press again shortly the "start"
(A) push button or (L).
The leds (E) (green) and (H)
(yellow) turn on.
The robot starts with the
stopped blade, which will start
functioning after the robot has
proceeded for at least 1 m
without
and/or the perimeter wire.

Delayed start

2-Press again for an extended time the
"start" (A) push button.
The leds (E) (green), (H) (yellow) turn
on and the led (B) (blue) flashes.
After 30 seconds, the robot enters in
the stand-by mode and will start trim-
ming the lawn after 3 hours.
Important
Both for the immediate start and for
the delayed start, if it is necessary to
stop the robot, it is enough to press
the "start" (A) push button or (L).
meeting obstacles
led (F)
push button
(A)
push button
(B)
led (G)
push button (L)
(M)
push button
(P)
push button
The robot and the blade stop almost in-
stantly.
The stop condition is indicated by the
flashing turning on of the led (E)
(green).
Warning - Caution
To stop the robot in safety conditions,
it is not enough to press the "start" (A)
push button or (L), but it is necessary
to then press the "stop" (B) push but-
ton as well.
- 26 -
IDM - 41501603300.tif
led (E)
led (C)
led (D)
led (H)
push
button (N)
IDM - 41501603000.tif
User's manual
batteries