AMBROGIO BASIC Manual De Uso página 78

DRIVE CHAINS LUBRICATION
1-Stop the robot in safety condi-
tions (see "Robot safety stop").
2-Undo the knobs (A).
3-Remove the hood (B).
GB
4-Undo the screws (C) and re-
move the body cover (D) on
both sides.
5-Lubricate chains.
Important
Before lubricating the chains,
check whether the tensioning is
correct and, if necessary, ad just
them (see "Chain tension adjust-
ment")
6-Reassemble body cover (D)
and tighten screws (C).
7-Assemble the hood (B).
Important
When reassembling the hood,
the hole (N) must be matching
with the referring plug. This as-
sures the correct functioning of
the battery polarity.
8-Fasten knobs (A).
knob (A)
hole (N)
- 36 -
hood (B)
IDM - 41501602100.tif
screw (C)
guard (D)
IDM - 41501602800.tif
hood (B)
IDM - 41501602600.tif
User's manual