AMBROGIO BASIC Manual De Uso página 80

GB
E F
C
D
B M G H
A
L
Problem Causes
Cutting blade with depos-
its and/or residues
Cutting blade worn out
The working area Working area too big
is not completely compared to the actual
trimmed capacity of the robot.
Batteries are about to
deplete their life cycle.
The batteries do not re-
charge completely.
Power supply break to
the transmitter
The robot stopped
with the led (F) Overheated power supply
(red) and (H) (yel- unit
low) flashing.
The wheel drive is not
correct
Damaged cutting blade
Cutting blade flooded by
residues (tapes, ropes,
plastic fragments, etc.).
The robot stopped
with the led (F)
(red) flashing and
The start of the robot oc-
the led (G) (blue)
curred with obstacles be-
on. Blade motor
ing too close (less than m
error
away) or in presence of
unexpected obstacles
(fallen branches, forgot-
ten objects, etc.).
Electrical motor malfunc-
tion
The wheel drive is not
correct
The robot stopped
with the leds (F) Rough ground or with ob-
(red ) and (G) stacles that hinder move-
(blue) flashing. ment.
Wheel motor er-
ror
One or both motors,
starting the wheel trans-
mission, in breakdown.
Solutions
Clean the cutting blade
Replace the blade with an
original spare part.
Ad just the working area (see
"Specifications")
Replace the batteries with
original spare part.
Recharge the batteries for at
least 12 hours
Restart the robot
Adopt suitable solutions to re-
duce the temperature of the
power supply unit (air or change
the installation area, etc.).
Check and, if necessary, ad-
just the chain tensioning.
Replace the blade with an
original spare part.
Remove the flood cause from
the blade.
Use protection gloves to
avoid the risk of cuts on han-
ds.
Stop the robot in safety condi-
tions (see "Robot safety
stop").
Remove the obstacles and re-
start the robot (see "Manual
start and stop of the robot")
Get the motor repaired or re-
placed by the nearest author-
ized Assistance centre.
Check and, if necessary, ad-
just the chain tensioning.
Check that the lawn to trim is
even, and without pits, stones
or other obstacles. If so, per-
form the necessary clear-
ance operations.
Get the motor repaired or re-
placed by the nearest author-
ized Assistance centre.
- 38 -
Caution
User's manual