Descargar Imprimir esta página

Troubleshooting Table - Snapper SB60V Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING:
recommended remedies below except remedies that require operation of the unit.
PROBLEM
Unit will not start.
The unit will start, but air will
not flow through the tube.
Cruise Control Lever doesn't
work.

TROUBLESHOOTING TABLE

Always stop unit and remove the battery before performing all of the
POSSIBLE CAUSE
1. Battery is not secure.
2. Battery is not charged.
3. Defective power switch.
Blocked tube.
The screw is loose.
1. To secure the battery pack, make
sure the battery is fully secured in the
blower. Refer to Installing the Battery
section in this manual.
2. Charge the battery pack according
to the instructions included with your
model.
3. Call 1-800-317-7833 for technical
service.
Inspect the intake vent and blower
tube for any blockage of air flow. If so,
remove the blockage.
Tighten the screw with a phillips head
screwdriver.
12
SOLUTION

Publicidad

loading