Publicidad
Idiomas disponibles
Idiomas disponibles
PACKING LIST
PART NAME
60V Blower
Blower Tube
60V 2.5Ah Battery
60V Charger
Operator's
Manual
Quick
Start Guide
ASSEMBLY
FIGURE
QTY
Please do not return product to retailer.
Porf avor,n od evuelva el producto al lugard ec ompra.
Veuillez ne pasr etourner le produita ud étaillant.
1-800-317-7833
www.snapper.com
InstructionM anual
Manuald eI nstrucciones
Manueld 'Instructions
60V LITHIUM-ION
CORDLESS STRING TRIMMER
Model ST60V
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en
lesiones graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respectert ousl es avertisse-
mentse tt outesl es instructions de sécurité.Toutdé fautde le fa ire
pourrait entraînerd es blessuresg raves.
Briggs & Stratton Power Products Group, LLC
Milwaukee, WI, USA
Rev. 00 07/30/15
QUICK START GUIDE
60V LITHIUM-ION
BRUSHLESS STRING TRIMMER
ST60V
WARNING:
This Quick Start Guide is not a substitute for reading the operator's manual. To reduce the risk of injury or death, user
must read and understand the operator's manual before using this product .
ATTACHING THE GUARD
1. Invert the string trimmer to access the
trimmer head.
2. Remove supplied screws (1) from the
2
trimmer head (4) with a philips
screwdriver (not included).
3
4
3. Place the guard (2) on to the trimmer
1
head.
4. Align the screw holes (3) on the guard
with the screw holes on the trimmer head.
5. Insert the screws into the trimmer
head, fastening the guard in place using a
Phillps head screwdriver (not included).
INSTALLING AN ATTACHMENT TO THE POWER HEAD
Note: Remove the rubber insert that is
located in the shaft prior to assembling
the string trimmer.
4
5
1. Loosen the attachment knob (1) on the
2
coupler (5).
2. Push in the release button (2) located
3
LOOSEN
on the attachment shaft (3). Align the
5
release button with the positioning hole
(4) and slide the two shafts together.
1
TIGHTEN
1
Rotate the attachment shaft until the
button locks into the positioning hole.
3. Tighten the attachment knob securely.
ATTACHING THE AUXILIARY HANDLE
1. Press the auxiliary handle (1) onto the
power head shaft so that the handle is
1
angled toward the rear handle that allows
for comfortable operation.
2. Slide the auxiliary handle over the
holder (2) and ensure the holder fits
between the slots on the auxiliary handle.
3
3. Align the holes on the auxiliary handle
with the holes on holder.
4. Insert the handle knob (3) through the
auxiliary handle.
2
5. Tighten until there is no movement in
the handle.
STARTING/STOPPING THE TRIMMER
1. Ensure a fully charged battery is
installed into the string trimmer.
2. Place one hand on the trigger handle.
Place the other hand on the auxiliary
handle.
3. Press and hold the lock-out button (2)
and squeeze the switch trigger (1). The
string trimmer will turn ON.
4. Release the lock-out button. The string
trimmer will stay on as long as the switch
1
2
trigger is held.
5. Release switch trigger to stop.
Do Not Return to Store
Missing parts, accessories or need a service center?
Call: 1-800-317-7833 www.snapper.com
WARNING:
entire Operator's Manual and follow all
warnings and instructions. Failure to follow all
instructions may result in electric shock, fire
and/or serious personal injury.
1
UNPACKING
This product requires assembly.
• Carefully remove the product and any
1
accessories from the box. Make sure that all
items listed in the packing list are included.
• Inspect the tool carefully to make sure
1
no breakage or damage occurred during
shipping.
• Do not discard the packing material until you
have carefully inspected and satisfactorily
1
operated the tool.
• If any parts are damaged or missing, please
call 1-800-317-7833.
WARNING:
1
if any parts on the packing list are already
assembled to your product when you unpack
it. Parts on this list are not assembled to the
product by the manufacturer and require
customer installation. Use of a product that
1
may have been improperly assembled could
result in serious personal injury.
WARNING:
damaged or missing, do not operate this
product until the parts are replaced. Use of
this product with damaged or missing parts
could result in serious personal injury.
WARNING:
modify this product or create accessories not
recommended for use with this string trimmer.
Any such alteration or modification is misuse
and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
battery until assembly is complete. Failure to
comply could result in accidental starting and
possible serious personal injury.
7
Read and understand
Do not use this product
If any parts are
Do not attempt to
Do not install the
Publicidad
