Koenic KIP 2432 Manual De Instrucciones página 16

Size - A5
English
Timer
Note: When using the timer function the
induction cooking plate will automatically
turn to standby after a preset time has
elapsed. The min./max. adjustable times are
0:01 minute/3:00 hours.
Set the timer
Fig.
11
To activate the timer press the timer
1
during cooking. The display shows
00:00 flashing.
The residual time can be set using
2
the +/– buttons. With a single tap of
the +/– button the value changes by 1
minute. When keeping the +/– button
pressed, the value changes quickly with
10 minutes increments.
Press timer button again to confirm
3
the set value.
Note: If the timer is activated, the display
alternatingly shows the residual time and the
preset temperature or power level.
After the preset time has elapsed the
induction cooking plate will be switched to
standby.
Key Lock
The induction cooking plate can be locked
against unintentional use (e.g. as child
protection). If the lock is activated all control
buttons except the on/off switch are locked.
Press + and – buttons at once to lock
Fig.
12
the control panel. A red LED turns on
centrally below the display. Press + and –
buttons at once for approx. 3 seconds to
unlock the control panel.
16
IM_KIP2432_180613_V04_HR.indb 16
Cleaning and care
Warning
• Unplug the product and let it cool down
completely before cleaning. Never
immerse electrical parts of the product in
water during cleaning or operation. Never
hold the product under running water.
• When cleaning, never use solvents or
abrasive materials, hard brushes, metallic
or sharp objects. Solvents are harmful to
human health and can attack plastic parts,
while abrasive cleaning mechanisms and
tools may scratch the surface(s).
Unplug the induction cooking plate
Fig.
13
and let it cool down completely before
cleaning.
Clean the product's exterior surfaces
Fig.
14
with a slightly damp cloth and then dry
them thoroughly. Make sure that no
water enters the product interior (for
example, through the switch).
13/6/18 4:26 pm