Saving A Program - Yamaha ProR3 Manual Del Propietário

16
Advanced uses (2) – Editing functions –
3) Entering a title
You can enter a program name of up to 16 characters for each of your own effect programs.
1. Press the OTHERS key.
The red indicator will light. Each time you press the OTHERS key, the title edit page and two
controller parameter pages will alternate.
2. Use the CURSOR keys (√) (®) to select the location of the character.
The cursor will indicate the location when a character can be selected. Each time you press the
CURSOR key, the cursor will move to the next/previous character location, and will "wrap
around" when it reaches the end of the title.
3. Press the INC or DEC key to change the character. You can also use the numeric keys to
enter numerals.
If you continue holding the INC or DEC key, the character will continue to change. The numerals
0 through 9, a "–" (minus), and a "." (decimal point) can be entered using the numeric keys.
4) Setting MIDI control parameters
You can specify parameters to be controlled via MIDI, and the range of control. (refer page 35)
1. Press the OTHERS key to access the MIDI control page.
2. Use the CURSOR keys (√) (®) to select parameters.
3. Use the INC and DEC keys to set the parameters.
Control 1 Prm
Control 1 Min
Control 1 Max
Control 2 Prm
Control 2 Min
Control 2 Max

5) Saving a program

Up to 90 programs whose parameters you have edited can be saved as USER programs.
1. Press the STORE key.
The PROGRAM indicator will blink, and a message will appear to ask the storing location.
ProR3 Digital Reverberator
Title Edit
[Dread Lurgi Verb]
Ctr1-1 Prm
RevTIM
– Select the parameter controlled by MIDI controller 1
0.0–100.0% Minimum value of the range of MIDI controller 1
0.0–100.0% Maximum value of the range of MIDI controller 1
– Select the parameter controlled by MIDI controller 2
0.0–100.0% Minimum value of the range of MIDI controller 2
0.0–100.0% Maximum value of the range of MIDI controller 2
Circus Big Top
Store from P01 to U01 ?
Min Max
0.0% 100.0
Reverb