Fluval Flex Manual De Instrucciones página 4

5. PUMP CONNECTION
C Push suction feet onto base and slide over to lock into place.
D Slide base onto underside of pump.
E Screw hose connector into pump; attach hose onto hose connector; screw locking thread onto hose.
Affix hose onto elbow. Then lower pump into rear corner of aquarium filter compartment. See (ill. 1)
F
G Place elbow against the hole of aquarium filter wall and screw output nozzle into elbow.
Aquasky LED with Bluetooth
1. Refer to your AQUASKY MANUAL for details on your new Bluetooth LED.
2. Ensure LED light fixture is securely installed. Wipe lens with a damp cloth.
3. Position lid on aquarium.
4. Plug in to electrical outlet.
ADDING A SECOND LIGHT (optional, sold separately)
1. Remove LED light
2. Add second LED light beside the newly moved light fixture and screw in the brackets
A
Maintaining your Aquarium
NOTE: To ensure the well-being of aquarium
inhabitants, it is essential to maintain your
aquarium. At the very minimum, remove
20% of the water once a week and replace
with tap water that is of similar temperature
to your tank and treated with the correct
dose of Fluval Water Conditioner. (Sold
separately)
NOTE: Regular replacement of Fluval filter
media is essential to ensure optimum
performance. The filter media should be
changed alternately in order to maintain continuous biological activity. To enhance bacterial action, pour a dose of
Fluval Biological Enhancer onto your filter inserts each time you change or clean the media. (Sold separately)
MEDIA
Foam Filter Block
Activated Carbon
insert
BIOMAX insert
2 YEAR LIMITED WARRANTY
Your Fluval FLEX aquarium and filter are guaranteed for defective parts and workmanship for a period of 2 years from the date of
purchase. This guarantee is valid with proof of purchase only. The guarantee is limited to repair or replacement only and does not
cover consequential loss or damage to animate or inanimate objects. This guarantee is valid provided the aquarium is placed on
a specifically designed aquarium cabinet or stand that is flat and level and has been installed in accordance with the installation
instructions and care guide. This guarantee excludes aquarium breakage due to misuse, chips, stress cracks caused by improper
support or other breakage. This guarantee is valid only under normal operating conditions for which the unit is intended. It excludes
any damage caused by unreasonable use, negligence, improper installation, tampering, abuse or commercial use. The warranty
does not cover wear and tear or parts which have not been adequately or correctly maintained. THIS DOES NOT AFFECT YOUR
STATUTORY RIGHTS.
RECYCLING
This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).This means that
this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or dismantled to
minimize its impact on the environment. Check with your local Environmental Agency for possible disposal instructions
or take to an official council registered refuse collection point. Electronic products not included in the selective
sorting process are potentially dangerous for the environment and human health due to the presence of
hazardous substances.
by unscrewing it from the brackets and moving it over to the end slot
A
PURPOSE
Mechanical Filtration:
Traps particles and debris
Chemical Filtration:
Eliminates toxic impurities,
odors and discoloration
Biological Filtration:
Provides Optimum
Biological Balance
B
Motor Cleaning
For optimum performance, clean impeller and impeller well,
every three (3) to six (6) months
MAINTENANCE
Rinse every 4-6 weeks
in aquarium water only
N/A
Rinse every 6-8 weeks
in aquarium water only
.
B
C .
C
REPLACEMENT
12 months
2 to 4 Weeks
2-3 months