Sears Kenmore 116.22312 Manual Del Propietário página 17

E
• wA""i.G .......
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
TO CHECK BRUSHES
whenbrushos
are worn to the
level of the base
support bars,
replace the
brush dowel°
Base Support Bars
TO REPLACE BRUSH DOWEL
1. Remove Power-Mate e cover, belt and
brush assembly. See "To Remove Belt" in
BELT CHANGING AND BRUSH
CLEANING°
2. Remove brush supports, washers,
screws, end brush, brush sprocket pieces
from ends of brush assembly.
3. Reassemble brush assembly. To line up
screw holes in dowel, sprocket and end
brush, be sure the brush portion of end
brush lines up with brushes on brush
dowel.
4. Replace belt, brush assembly, Power-
Mate%over, light bulb and light cover. See
"To replace belt" in BELT CHANGING AND
BRUSH CLEANING_
W_asher
End
Cap
Agitator Unit
Brush
Sprocket
Flange
Brush Sprocket
End
Brush End
I Screw Cap
Screw i _
Washer
17