How To Use - VOX electronics TM - 1057 Manual De Usuario

SWITCH BOTTON
Fig.2

HOW TO USE

Before initial use
1. Before first use, unpack the appliance and place all parts on a horizontal surface.
2. The jar assembly (including the measure cup, lid, seal ring 1, jar, seal ring 2, blade assembly and
jar base) has already been assembled into the motor unit. Disassemble to wash all detachable parts
except the motor unit. Refer to the latter chapter CARE AND CLEANING.
3. Once all pieces have been cleaned and dry thoroughly, reassemble.
1) Invert the jar onto a level surface, holding the jar handle, put the seal ring 2 and blade assembly
onto the jar base bottom and secure the blade assembly by turning it anti-clockwise until tight（See
Fig.3）
2) Reposition the jar assembly with its opening upwards. Wrap the seal ring 1 around the lid bottom
and put the lid onto the jar assembly. Place the measure cup exactly into the lid by fitting the small
projection on the both sides of the cup into the slots of the lid and turning the cup clockwise until tight.
（See Fig.4）
3) Finally, place the assembled jar onto the motor unit by aligning the strip on the assembled jar
bottom. (See Fig.5）
CAUSION: Jar and jar base is now secure. Do not try to twist the jar and jar base onto motor unit
Fig.4
Fig.3
4