Pre-Checks; Donning Procedure - Respirex FloPod Instrucciones De Uso

• The Flo-Pod™ system is not designed to be used for
abrasive blasting operations or in applications with
a high flammability risk. Alternative PPE offering the
necessary level of protection should be utilised for
such applications.
• The Flo-Pod™ system should not be worn in working
environments that require the wearing of safety
helmets or where protection against non-ionizing
radiation is necessary.
• Materials used in the construction of the system are
not known to cause allergic reactions to the majority
of individuals. The system contains no components
made from natural rubber latex.
• Do not attempt to service the Flo-Pod™ hood; the
hood contains no user-serviceable parts.
• Usable temperature range -10
ity of <90%.

Pre-Checks

To ensure proper functioning, the hood and all
component parts should be inspected for damage
prior to use. Do not use any hood which shows signs
of failure which may reduce the degree of protection
intended.
1. Remove the hood from its packaging and fold out.
2. Carry out a thorough visual inspection for any
damage that may impair correct operation.
3. Check the hood is free from contamination, both
externally and internally.
4. Check the hood materials are free from tears and
holes, paying particular attention to the seam
areas.
5. Check that vision through the visor is not obscured
by large scratches or scuff marks.
6. Ensure the expiry date printed on the P3 filter
canister has not been exceeded.
7. Respirex recommend that the exhalation valves
are part of the visual pre-check. If the valve
diaphragm is distorted or damaged in any way the
hood should not be used.
8. Ensure the battery pack has been charged as
detailed in the instructions supplied with the Flo-
Pod™ turbo unit, and/or that sufficient charge
remains to power the turbo unit for the likely
duration of the relevant work task.
ENGLISH
C to +40 C at a humid-
o o

Donning procedure

Note: Before beginning the donning process, ensure
that the Flo-Pod™ turbo unit has been correctly fitted to
the Flo-Pod™ hood following the instructions supplied.
Important: Before donning the Flo-Pod™ hood wearers
should familiarise themselves thoroughly with the user
information supplied with the Flo-Pod™ turbo unit.
It is recommended that before using a Flo-Pod™
system for the first time wearers are given training by
a competent person, and that details of the training are
recorded.
1. Remove any outer clothing and personal effects
which may cause damage to the hood (e.g. pens,
badges, jewellery, etc.).
2. Ensure that a P3 filter canister is screwed firmly
into the Flo-Pod™ turbo unit (Fig.1).
3. Adjust the battery pack waist belt until comfortable
and fasten the buckle securely.
4. Plug the power cable connected to the Flo-Pod™
turbo unit into the socket on the battery pack
(Fig.2). Ensure that the white line marked on the
cable plug is aligned with the arrow marked on the
battery pack.
Fig. 1. Check P3 filter is fitted to
Fig. 2. Plug turbo unit power cable
into battery pack
turbo unit
3