Analogue Display - Refco REFMATE 4688001 Manual De Instrucciones

Bedienungsanleitung REFMATE
6.1.1

Analogue display

13
Superheat and Subcool
By pressing
you can switch between the digital
and analogue displays.
Slave pointer
The pointer remains in the outer
ring of the analogue display at the
highest pressure reached.
--.- No reading/value
OOR Out of range
OCP Over critical point
no cal. Device not calibrated
Set reference pressure
To set a reference pressure, press
and hold
The pressure difference is also
displayed.
To delete the reference pressure,
press and hold
The two above-mentioned functions
are only available in the analogue
display.
Deutsch
for 3 seconds.
for 3 seconds.