Display And Control Panel - HSM ProfiPack P425 Instrucciones De Servicio

KHD Handels-GmbH - www.khd-kl.com - www.khd-handel.de - Fon +49 (0) 631 570 46 80 - Autorisierter HSM-Direkthändler
3 Transportation and installation
Connect the power cable to the machine.
The machine must be connected to a power
source which meets the specifications on the
nameplate. Make sure that the power cable
is unobstructed and that nobody can tread
on it. Connect the power plug of the machine
into a properly installed socket.
• Lock the front castors by pressing
down the brake lever.
Note:
The HSM ProfiPack 425 can also be sup-
plied with a built-in suction device.
Using a suction device you can extract dust
while processing the cardboard.
If your device has the built-in suction device,
there is a connection for the suction device
on the right side (9).
If your device does not have this apparatus,
you can fit the components later when
needed.
ProfiPack conversion kit:
Order number 1.531.200.001
Wet/dry suction:
Order number 1.531.200.031
06/2018
4 Overview
8
2
1
3
7
1 Feed opening
2 Safety notice
3 Warning sticker / type plate
4 Operator control panel
5 Emergency stop button
6 Limit stop
7 Rolls
8 "Padding" flap
9 Connection for suction device
10 Cable holder

5 Display and control panel

1
2
3
1 Forward button
2 Stop button
3 Reverse button
4 Settings buttons
5 "Speed" display
6 "Ready for operation" display
7 "Blockage" display
ProfiPack P425
english
5
4
6
9
10
7
4 5 4
6 7
9