E/D/E HLT1- 520 Manual De Instrucciones página 12

Bedienungsanleitung · Operating Instructions · Mode d'emploi
Istruzioni per l'uso · Gebruiksaanwijzing · Instrukcja obsługi
Manual de instrucciones
6. The truck shall not be used to transport persons.
7. It is recommended to the driver to wear security shoes.
8. No modifications shall be carried out which adversely affect the
compliance of the truck with EN 1757-4.
1. Screw (part No.158)
l To prevent oil leaking from oil tank during transportation, Air
Screw (part No.158) is replaced with Oil-sealing Screw in the
factory. But it has to be replaced back when you put this truck in
use.
l How to change: Screw out Oil-sealing Screw, then screw in Air
Screw, thus keep oil tank always connecting with atmosphere.
2. Handle
During transportation, the handle is disassembled from the truck
and packed separately. It has to be assembled back and adjusted
properly and carefully before use.
A. Handle installation:
l Take 3 pieces of M10 Nut (No.186) & Hex Wrench from spare
parts bag. Select handle to match the truck with the same fitting
numbers.
l Assemble the handle on the Handle Base (No.181) with 3
pieces of M10 Nut & Spring Washer tightly.
l Put the chain's Eye Bolt (No.110) in the slot at the front end of
Pendulum Arm (No.112).
E/D/E GMBH · EDE PLATZ 1 · 42389 WUPPERTAL · GERMANY
Installation & Adjustment
P A G E | 12